A convenient package that includes two 20mm hubcentric wheel spacers (for 5x112mm bolt pattern BMWs with 66.56mm center bore) as well as ten (10) Premium wheel studs (to convert from wheel bolts to wheel studs) as well as ten black wheel nuts. This is enough hardware to convert one axle (two wheels, either front or rear).
Video: BimmerWorld BMW 5x112 Wheel Spacer Test Fit
Package Includes:
2 x 20mm black anodized spacers
10 x 92mm BimmerWorld Premium M14 wheel studs
10 x 17mm black wheel nuts
2 x Install nuts
Our BimmerWorld Wheel Spacer Sets are specifically designed to fit your BMW's 66.56mm center hub, retaining the proper hub centric design while adding highly desired track width. They're designed to work with factory BMW wheels and nearly all aftermarket wheels. Whether you need a spacer set for correct wheel fitment, clearance for a set of big brake calipers or if you just want to widen your track width, we have the correct spacer to fit your needs.
Note: Hub, spacer, and wheel must fit together with zero gap between them. A gap between any component is a cause for failure. Check for a snug fitment with no wobble on each component. Click this link to learn more and watch a video of our paper test to ensure a proper and safe fitment.
Sold as a set / pair. Enough for two wheels.
“What is the BMW wheel nut torque?” Our torque spec for wheel nuts (not bolts) is 75ft-lbs done when the nuts and wheel are cold (ambient temp). Do not torque when the nuts are hot and do not exceed 75ft-lbs. Remember that nuts - and studs - are consumables and should be inspected and replaced periodically. See our instructions link above for complete stud and nut installation guidelines.
